26 in 1 12V Car Cigarette Lighter Plug Paintless Dent Puller

1. 10 PCS of dent & ding puller tab, replacement suckers in different shapes for multiple purposes. 2. Repairs the dents on your car. 3. Slide hammer is more powerful for paintless dent repair, conquer big dent. 4. Use widely for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc. 5. Steps: (1). Clean the dent with a clean wet cloth (2). Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes (3). Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is) (4). Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue) (5). Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter) (6). Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent (7). Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen (8). Clean the repaired place with a clean wet cloth 6. Package: 2 in 1 puller x 1 12V 20W Glue Gun x 1, cable length: 5m Blue Tabs x 10 Black Glue Sticks x 5 Yellow Glue Sticks x 5 Shovels x 2 Towel x 1 Alcohol Bottle(Alcohol not included) x 1 English Manual x 1 Tools Bag x 1