Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
3 in 1 Cooling Heatsink Aluminium Heat Sink Pad Shims for Raspberry Pi 3 / 2 — image 1
Hover to zoom

1 / 4 · Click to enlarge

3 in 1 Cooling Heatsink Aluminium Heat Sink Pad Shims for Raspberry Pi 3 / 2

5.03 ratings
Color
AI Summary
Raspberry Pi & Orange Pi for everyday users

The 3 in 1 Cooling Heatsink Aluminium Heat Sink Pad Shims for Raspberry Pi 3 / 2 is a value-for-money raspberry pi & orange pi designed for everyday users. It features Material: Aluminium and Size: 14.5x14.5x6mm, 9x9x5mm, 9x9x5mm. Customers praise its accurate and reliable.

accurate and reliablecompact and portable
₹1,339
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,339
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Material: Aluminium
Size: 14.5x14.5x6mm, 9x9x5mm, 9x9x5mm
Weight: 3g
Package Contents: 3 x Cooling Heatsink
One Package Weight: 0.01kgs / 0.03lb
One Package Size: 3cm * 2.5cm * 0.7cm / 1.18inch * 0.98inch * 0.28inch

Ideal For

Everyday convenience
Share:
SKU: S-DIY0209Category: Raspberry Pi & Orange Pi

About This Product

The 3 in 1 Cooling Heatsink Aluminium Heat Sink Pad Shims for Raspberry Pi 3 / 2 is a value-for-money raspberry pi & orange pi designed for everyday users. Customers highlight its accurate and reliable.

Key Specifications

  • Material: Aluminium — built to last with a quality finish
  • Size: 14.5x14.5x6mm, 9x9x5mm, 9x9x5mm
  • Weight: 3g
  • Package Contents: 3 x Cooling Heatsink
  • One Package Weight: 0.01kgs / 0.03lb
  • One Package Size: 3cm * 2.5cm * 0.7cm / 1.18inch * 0.98inch * 0.28inch
  • Best Sellers Rank (Consumer Electronics): #1893
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #46

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. The product is used for Raspberry Pi 3 / 2. 2. It dissipates heat off your Raspberry Pi in high efficiency, improving its performance. 3. The cooling heatsink have special stickers affixed, just tear off the paper, easy to install.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.