Alarm Finder Tracer Buzzer for RC Lost Aircraft

The Alarm Finder Tracer Buzzer for RC Lost Aircraft is a simple device that plugs into any servo/Rx port, will detect the loss of the TX signal and emit a loud 85dB alarm. Ideal for warning you if you have not turned off your RX power supply while in the pits, or if you are having trouble finding a model in the long grass, simply turn off your TX and within few minutes, the alarm will sound. This is a less expensive solution for a very common problem.

How it Works:

RC lost Airplane finder helicopter Parkflyer tracer glider Aircraft Alarm is very easy to use just connect the alarm between the servo and the receiver, i.e.it acts as a servo extension cord. Now, turn on your TX. and you will hear 2 x beep sound. Do not move any of the control stick on the TX or simply turn off the TX. You will hear a continuous beep sound after 5 minute. It will stop once u turn on your TX or move the control stick. If you ignore the continuous beep sound for around 2minutes, the beep sound will change the louder V sound. You need to disconnect the alarm from the receiver in order to switch off the alarm. MAKE SURE THE CORRECT POLARITY BEFORE TURN ON THE TX.

---

Features :

1. Easy to use.
2. Let you know where your RC aircraft is when you lose connection with it.
3. Particularly useful when the multirotor is out of control,
4. Easy to install, simply connect the alarm between the servo and the receiver.
5. Most suitable for finding lost Unmanned Vehicle.
6. Small and handy module.
7. It becomes very noisy when it loses TX signal as long as it is gets disconnected from the receiver

---

Package Includes :

1 x Alarm Finder Tracer Buzzer for RC Lost