Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
AMS1117 3.3V Power Supply Module — image 1
Hover to zoom

1 / 5 · Click to enlarge

AMS1117 3.3V Power Supply Module

4.710 ratings
661+ bought in past month
AI Summary
Buck Converter for everyday users

The AMS1117 3.3V Power Supply Module is a value-for-money buck converter designed for everyday users. It features IC Chip: AMS1117 and Input Voltage (V): 4.5 to 12. Customers praise its excellent build quality and great value for money. 100% of buyers rate it 4★ or above.

excellent build qualitygreat value for moneyaccurate and reliable
₹515
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹515
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

IC Chip: AMS1117
Input Voltage (V): 4.5 to 12
Output Voltage: 3.3
Max. Operating Current (A): 0.8
Length (mm): 26
Width (mm): 12

Ideal For

Everyday convenience
Share:
SKU: robu-28373Category: Buck Converter

About This Product

The AMS1117 3.3V Power Supply Module is a value-for-money buck converter designed for everyday users. Customers highlight its excellent build quality and great value for money.

Key Specifications

  • IC Chip: AMS1117
  • Input Voltage (V): 4.5 to 12 — works with standard household power
  • Output Voltage: 3.3 — works with standard household power
  • Max. Operating Current (A): 0.8
  • Length (mm): 26
  • Width (mm): 12
  • Weight (g): 0.6
  • Shipping Weight: 0.085 kg

Customer Verdict

100% of buyers rated this product 4 stars or above. The most appreciated qualities are: excellent build quality, great value for money, accurate and reliable.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This AMS1117 3.3V Power Supply Module is based on the AMS1117 3.3V regulator. It is capable of regulating a wide range of input voltage (4.0 to 12V) down to a fixed 3.3V output at up to 1A (Vin = 4.5V). Standard 0.1" header pins provide a means of connecting to its input and output terminals. These header pins have also been conveniently placed so that the module can be inserted face down into standard
Note: Do not exceed absolute maximum input voltage (12.5V) or output current. Exceeding maximum specifications can result in permanent damage to this module or any connected devices.

Features :

  1. Onboard AMS1117 chip.
  2. Onboard power indicator to indicate power is turned on: Red LED.
  3. Output voltage interface, connection to facilitate the experimental.
  4. Specially designed two pin mounting holes, can be directly fixed on the whole expansion board for experiments.
  5. Small Compact Size, 4Pin Type, Breadboard Friendly.
  6. 2P single row pin input and output for easy connection
  7. Dual-panel design, the layout is nice

Package Includes :

1 x AMS1117 3.3V power supply module (Unsoldered).

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.