Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Arducam 5 Mega pixel Camera Module OV5642 1080P JPEG Output — image 1
Hover to zoom

1 / 3 · Click to enlarge

Arducam

Arducam 5 Mega pixel Camera Module OV5642 1080P JPEG Output

31+ bought in past month
AI Summary
Arducam Cameras and Accessories for everyday users

The Arducam 5 Mega pixel Camera Module OV5642 1080P JPEG Output by Arducam is a mid-range arducam cameras and accessories designed for everyday users. It features Shipping Weight: 0.02 kg and Shipping Dimensions: 5 × 5 × 5 cm.

₹3,444
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹3,444
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Shipping Weight: 0.02 kg
Shipping Dimensions: 5 × 5 × 5 cm

Ideal For

Photography and videographySecurity monitoringLive streaming
Share:
SKU: robu-2194530Category: Arducam Cameras and Accessories

About This Product

The Arducam 5 Mega pixel Camera Module OV5642 1080P JPEG Output by Arducam is a mid-range arducam cameras and accessories designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Shipping Weight: 0.02 kg
  • Shipping Dimensions: 5 × 5 × 5 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Introduction Arducam OV5642 camera breakout incorporates Omnivision 1/4−inch CMOS active−pixel digital imaging sensor OV5642 with an active pixel array of 2592×1944. The entire system-on-a-chip (SOC) has onchip AEC/AGC/AWB etc ISP functions, and supports RAW/YUV/RGB/JPEG different output format. Key Specification Optical format 1/4−inch (4:3) Full Resolution 2592 x 1944 Pixel size 1.4 x 1.4µm Color filter

Applications:

  1. image acquisition
  2. Enviornment monitor
  3. Inductrial cameramachine vision flow detection
  4. medical endoscope
  5. video telephone
  6. safety guard alarm system
  7. door bell camera and video door bell
  8. vehicle monitoring
  9. romote monitor and control
  10. digital image record
  11. 3D scanner printer
  12. intelligent toys

Features:

  1. Onboard LDO regulators for 2.8V and 1.8V
  2. Single 3.3V power input
  3. 2.54mm (0.1 inch) standard pin out
  4. active array size: 2592 x 1944
  5. power supply:
  6. core: 1.5VDC + 5% (internal regulator)
  7. analog: 2.6 ~ 3.0V
  8. I/O: 1.7 ~ 3.0V
  9. output formats :
  10. (8-bit): YUV(422/420) / YCbCr422,
  11. RGB565/555/444, CCIR656,
  12. 8-bit compression data,
  13. 8/10-bit raw RGB data
  14. lens size: 1/4″
  15. input clock frequency: 6 ~ 27 MHz
  16. shutter: rolling shutter
  17. maximum image transfer rate:
  18. 5 megapixel (2592×1944): 15 fps (and any size scaling down from 5 megapixel)
  19. scan mode: progressive
  20. image area: 3673.6 µm x 2738.4 µm
  21. RAW,RGB,YUV,JPEG output support
  22. External 1/4 inch high quality M12x0.5 lens

Package Includes:

1 x Arducam 5 Mega pixel Camera Module OV5642 1080P JPEG Output

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.