Hover to zoom

ARIES MICRO v1.0 Development Board

Name: ARIES MICRO v1.0 Development Board
Brand: VEGA Processor
SKU: 1722834
Price: 1640 INR
Availability: InStock
Rating: 3.0 (1 reviews)

3.01 rating

260+ bought in past month

AI Summary

Advance Development Boards for everyday users

The ARIES MICRO v1.0 Development Board by VEGA Processor is a mid-range advance development boards designed for everyday users. It features Item Type: Development Board and Model Series: ARIES.

₹1,640

Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Quantity

Total: ₹1,640

Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.

Estimated delivery: 17 Aug – 31 Aug

Check delivery date

Free Shipping

Pan India delivery

15-Day Returns

Hassle-free policy

Secure Payment

Razorpay protected

Quality Assured

Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Development Board

Model Series: ARIES

Controller: THEJAS32

SRAM: 256 KB

RAM: 256 kB

Flash Memory: 2MB.

Ideal For

Everyday convenience

SKU: robu-1722834Category: Advance Development Boards

About This Product

The ARIES MICRO v1.0 Development Board by VEGA Processor is a mid-range advance development boards designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

Item Type: Development Board
Model Series: ARIES
Controller: THEJAS32
SRAM: 256 KB
RAM: 256 kB — effortless multitasking
Flash Memory: 2MB. — effortless multitasking
Input Voltage (V): 5-6V — works with standard household power
PWM Pins: 8 nos

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

ARIES MICRO v1.0 is a high-performance development board with loads of features in a small form factor. This breadboard-friendly development platform is based on THEAJS32 ASIC which operates at a frequency of 100MHz. THEJAS32 SoC includes VEGA ET1031 Microprocessor, 256KB internal SRAM, Three UARTs, Four SPIs, Three TIMERs, Eight PWMs, Three I2C interfaces, 25 GPIOs, etc. This board contains everything needed to support the standalone operation. To get started simply connect the board to a computer with a USB cable or a battery. This board is designed and developed by the Centre for Development of Advanced Computing (C-DAC) as part of the Microprocessor Development Programme project funded by the Ministry of Electronics and Information Technology, Government of India. This board is targeted for a wide variety of applications which includes low-power IoT, Sensor fusion, Smart meters, System supervisors, Remote sensors, Wearable devices, Toy and electronic education equipment, Legacy 8/16-bit applications, Industrial networking, and many more…

Features:

ARIES MICRO v1.0 Development Board.
Compact and versatile for embedded system development.
Supports various microcontrollers.
Multiple I/O interfaces for flexibility.
Includes Wi-Fi, Bluetooth, and onboard sensors.
Arduino and Raspberry Pi are compatible.

Package Includes:

1 x ARIES MICRO v1.0 Development Board

Setup Guide

Identify the pins

Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.

Wire to your microcontroller

Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.

Install libraries

In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.

Upload example sketch

Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.

Calibrate if needed

Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.