Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
AT24C02 I2C Interface EEPROM Storage Module — image 1
Hover to zoom

1 / 2 · Click to enlarge

AT24C02 I2C Interface EEPROM Storage Module

38+ bought in past month
AI Summary
USB Interface Module for everyday users

The AT24C02 I2C Interface EEPROM Storage Module is a value-for-money usb interface module designed for everyday users. It features Shipping Weight: 0.005 kg and Shipping Dimensions: 4 × 3 × 2 cm.

₹539
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹539
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Shipping Weight: 0.005 kg
Shipping Dimensions: 4 × 3 × 2 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-3444341Category: USB Interface Module

About This Product

The AT24C02 I2C Interface EEPROM Storage Module is a value-for-money usb interface module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Shipping Weight: 0.005 kg
  • Shipping Dimensions: 4 × 3 × 2 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The AT24C02 I2C EEPROM Storage Module is a compact and reliable memory solution designed for microcontroller and embedded system projects. It offers 2Kbit (256 bytes) of non-volatile storage, ensuring data retention even after power loss. This module is ideal when internal EEPROM memory is insufficient but large storage solutions like SD cards are unnecessary. With an easy-to-use I2C interface, it enables seamless communication with platforms such as Arduino and other controllers.

The onboard pull-up resistors simplify integration, reducing external component requirements. With high endurance and long data retention, it is suitable for storing configuration data, logs, and critical parameters. Its small PCB size and clearly labeled pins make it convenient for prototyping and compact designs in IoT, robotics, and automation applications.


Features:

  1. AT24C02 onboard EEPROM chip
  2. 2Kbit (256 bytes) non-volatile memory
  3. I2C two-wire communication interface
  4. Supports 3.3V to 5V operation
  5. Built-in I2C pull-up resistors
  6. High endurance up to 1,000,000 write cycles
  7. Long data retention up to 100 years
  8. Compact size with labeled pins for easy use

Specifications:

  1. Item Type: EEPROM Storage Module
  2. Chip Model: AT24C02
  3. Module Type: I2C EEPROM Memory Module
  4. Storage Capacity: 2Kbit (2048 bits) = 256 Bytes
  5. Interface: I2C (Inter-Integrated Circuit)
  6. Communication Protocol: I²C Two-Wire Serial Interface
  7. Operating Voltage: 3.3V – 5V
  8. Write Time: 5 ms per byte
  9. Data Retention: 100 years
  10. Write Cycle Endurance: 1,000,000 cycles
  11. Onboard Components: I2C Pull-up Resistors Included
  12. Dimensions: 20 × 11 x 1 mm
  13. Weight: 1 g

Package Includes: 

1 x AT24C02 I2C Interface EEPROM Storage Module

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.