Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Waveshare BMM150 3-Axis Magnetometer Sensor — image 1
Hover to zoom

1 / 5 · Click to enlarge

WAVESHARE

Waveshare BMM150 3-Axis Magnetometer Sensor

36+ bought in past month
AI Summary
IMU, Accelerometer, Magnetometer and Gyroscope for everyday users

The Waveshare BMM150 3-Axis Magnetometer Sensor by WAVESHARE is a value-for-money imu, accelerometer, magnetometer and gyroscope designed for everyday users. It features Item Type: Magnetometer and Model No. / Name: Magnetometer Sensor.

₹1,173
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,173
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Magnetometer
Model No. / Name: Magnetometer Sensor
Communication Mode: I2C / SPI (I2C bus by default)
Operating Power: 3.3V~5V
Magnetic field range: 1300μt (X, Y axis), 2500μt (Z axis)
Resolution: 0.3μT

Ideal For

Everyday convenience
Share:

About This Product

The Waveshare BMM150 3-Axis Magnetometer Sensor by WAVESHARE is a value-for-money imu, accelerometer, magnetometer and gyroscope designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Magnetometer
  • Model No. / Name: Magnetometer Sensor
  • Communication Mode: I2C / SPI (I2C bus by default)
  • Operating Power: 3.3V~5V
  • Magnetic field range: 1300μt (X, Y axis), 2500μt (Z axis) — reliable connection even at a distance
  • Resolution: 0.3μT
  • Operating Temperature (°C): -40℃ ~ +85 ℃
  • Dimensions (L x W x H) mm: 30 x 20 x 10

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The BMM150 3-axis Magnetometer Sensor is a highly accurate and versatile digital compass sensor designed for precise magnetic field measurement. It is commonly used in various applications, including navigation systems, augmented reality, robotics, and IoT devices. The sensor employs advanced magnetoresistive technology to detect and measure the Earth's magnetic field in three dimensions: X, Y, and Z axes. This enables it to provide accurate heading information and magnetic field measurements, making it an essential component in compass and orientation systems.

Features:

  1. Onboard BMM150 for measuring the magnetic field in three perpendicular axes
  2. Supports I2C/SPI interface communication, I2C interface by default, SPI switchable via onboard resistor
  3. Onboard voltage translator, compatible with 3.3V/5V level
  4. Comes with online development resources and manual (examples for Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32)

Package Includes:

1 x Waveshare BMM150 3-axis Magnetometer Sensor, Digital Compass Sensor, Magnetic Field Measurement

1 x 5pin connector cable

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.