Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
CORILE A6 Intelligent APP Planning Automatic Infrared Sensor Obstacle Avoidance Sweeping Robot (White) — image 1
Hover to zoom

CORILE A6 Intelligent APP Planning Automatic Infrared Sensor Obstacle Avoidance Sweeping Robot (White)

AI Summary
Robot Vacuums Cleaners for premium buyers

The CORILE A6 Intelligent APP Planning Automatic Infrared Sensor Obstacle Avoidance Sweeping Robot (White) is a premium robot vacuums cleaners designed for premium buyers. It features One Package Weight: 2.31kgs / 5.10lb and One Package Size: 30cm * 30cm * 10cm / 11.81inch * 11.81inch * 3.94inch.

₹11,905
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹11,905
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 2.31kgs / 5.10lb
One Package Size: 30cm * 30cm * 10cm / 11.81inch * 11.81inch * 3.94inch
Best Sellers Rank (Consumer Electronics): #7822
Best Sellers Rank (Consumer Electronics > Smart Home): #840
Best Sellers Rank (Consumer Electronics > Smart Home > Robot Vacuum Cleaner): #110

Ideal For

Everyday convenience
Share:
SKU: S-CA0742WCategory: Robot Vacuums Cleaners

About This Product

The CORILE A6 Intelligent APP Planning Automatic Infrared Sensor Obstacle Avoidance Sweeping Robot (White) is a premium robot vacuums cleaners designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 2.31kgs / 5.10lb
  • One Package Size: 30cm * 30cm * 10cm / 11.81inch * 11.81inch * 3.94inch
  • Best Sellers Rank (Consumer Electronics): #7822
  • Best Sellers Rank (Consumer Electronics > Smart Home): #840
  • Best Sellers Rank (Consumer Electronics > Smart Home > Robot Vacuum Cleaner): #110

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Features 1. Climb at 18 degrees, easily handle obstacles and bumps on the ground. 2. Ultra-thin body, can easily drill into the bottom of the bed, sofa for cleaning, 3. Various cleaning methods: Planning and cleaning along the wall: specifically to deal with dead ends Focus mode cleaning: improve the cleaning effect Automatic cleaning: different environments, different modes Bow cleaning: planned cleaning to improve efficiency 4. Vacuum suction port, kPa suction. 5. Front double brushes-sweep dust, middle-mounted gale suction port-suck in dust, rear rags-mop the floor clean Specification 1. Dust box capacity: about 650ML 2. Battery capacity: 4400MAH 3. Working voltage: 3.7V 4. Working time: 60-90 minutes of battery life 5. Charging time: 4-6 hours 6. Rated power: 6W 7. Cleaning area: 150M 8. Applicable scene: level ground, marble, ceramic tile, carpet, etc. 9. Noise: less than 65dB 10. Size: 275X65mm 11. Weight: 1.8kg

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.