Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Correlation Photoelectric Infrared Count Slot Sensor Module 15 mm — image 1
Hover to zoom

1 / 4 · Click to enlarge

Correlation Photoelectric Infrared Count Slot Sensor Module 15 mm

32+ bought in past month
AI Summary
Rotary Encoder for everyday users

The Correlation Photoelectric Infrared Count Slot Sensor Module 15 mm is a value-for-money rotary encoder designed for everyday users. It features Model No. / Name: Photoelectric Sensor Module and Operating Voltage (VDC): 3.6 to 5.

₹637
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹637
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Photoelectric Sensor Module
Operating Voltage (VDC): 3.6 to 5
Main Chip: LM393
Avg. Current Consumption: 33
Length (mm): 22
Width (mm): 20

Ideal For

Everyday convenience
Share:
SKU: robu-863443Category: Rotary Encoder

About This Product

The Correlation Photoelectric Infrared Count Slot Sensor Module 15 mm is a value-for-money rotary encoder designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Photoelectric Sensor Module
  • Operating Voltage (VDC): 3.6 to 5 — works with standard household power
  • Main Chip: LM393
  • Avg. Current Consumption: 33
  • Length (mm): 22
  • Width (mm): 20
  • Weight (g): 5
  • Additional Specs.: width of the optical coupling slot: 15 mm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The correlation photoelectric Infrared count slot sensor module is a high-quality infrared Counter module at a very cheap price which comes with tiny size and integrated LM 393 chip. The module can be used with a microcontroller, Arduino, and even Raspberry Pi for motor speed detection, pulse count, position detection, pulse counting. This module can basically detect when an object passes between the transmitter and the receiver and breaks the beam. It works as, 1. The OUT pin is a low level when there is no object between the photoelectric sensor, and the red LED is lit. 2. The OUT pin is a high level when there is an object between the photoelectric sensor, and the green LED is not bright. 3. The OUT port can be connected to MCU directly, Than MCU can calculate how many circles the smaller car has run per unit
Note: The sensitivity is not adjustable.

Features:

  1. The width of the optical coupling slot: 15mm
  2. With a signal output indication.
  3. Single signal output
  4. The circuit board output switch!
  5. The output valid signal is low.
  6. It is useful for workpiece counts.
  7. It's also useful for industry counting, motor speed testing .

Package Includes:

1 x Correlation photoelectric Infrared count Slot sensor module.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.