Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
ELECROW Crowtail-One Wire Waterproof Temperature Sensor — image 1
Hover to zoom

1 / 2 · Click to enlarge

ELECROW

ELECROW Crowtail-One Wire Waterproof Temperature Sensor

31+ bought in past month
AI Summary
Temperature Sensor Probes for everyday users

The ELECROW Crowtail-One Wire Waterproof Temperature Sensor by ELECROW is a value-for-money temperature sensor probes designed for everyday users. It features Item Type: Sensor and Model No. / Name: WaterProof Temperature Probe.

water-resistant
₹793
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹793
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Sensor
Model No. / Name: WaterProof Temperature Probe
Rated Voltage (VDC): 3 to 5.5
Accuracy: -10 to +85 degree
Tube Material: Stainless steel
Tube Diameter (mm): 30mm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2064824Category: Temperature Sensor Probes

About This Product

The ELECROW Crowtail-One Wire Waterproof Temperature Sensor by ELECROW is a value-for-money temperature sensor probes designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Sensor
  • Model No. / Name: WaterProof Temperature Probe — protected against splashes and rain
  • Rated Voltage (VDC): 3 to 5.5 — works with standard household power
  • Accuracy: -10 to +85 degree
  • Tube Material: Stainless steel — built to last with a quality finish
  • Tube Diameter (mm): 30mm
  • Bluetooth Version: Supports Bluetooth 5.1 dual mode function — faster pairing, longer range, and lower battery draw
  • Measuring Temperature (°C): -55 to +125 degree

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

A NEW member of our “Crowtail family”, maybe we can use it easier. This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125 degrees, the cable is jacketed in PVC so we suggest keeping it under 100 degrees. Because they are digital, you don't get any signal degradation even over long distances! The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Usable with 3.0-5.5V systems.

Features:

  1. 9 to 12-bit selectable resolution
  2. one digital pin for communication
  3. Multiple sensors can share one pin
  4. Query time is less than 750ms
  5. Crowtail compatible interface

Package Includes:

1 x ELECROW Crowtail-One Wire Waterproof Temperature Sensor

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.