Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Espressif ESP32-DevKitM-1 Development board — image 1
Hover to zoom

1 / 2 · Click to enlarge

Espressif

Espressif ESP32-DevKitM-1 Development board

35+ bought in past month
AI Summary
Espressif Dev. Boards and Modules for everyday users

The Espressif ESP32-DevKitM-1 Development board by Espressif is a mid-range espressif dev. boards and modules designed for everyday users. It features Item Type: ESP32 Based and Processor: 32 Bit Xtensa dual Core.

₹1,599
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,599
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: ESP32 Based
Processor: 32 Bit Xtensa dual Core
Clock Frequency: 240MHz
WiFi Specs.: IEEE 802.11 b/g/n 2.4Ghz
Bluetooth Version: 4.2 BR/EDR BLE
SRAM: 520kB

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1696729Category: Espressif Dev. Boards and Modules

About This Product

The Espressif ESP32-DevKitM-1 Development board by Espressif is a mid-range espressif dev. boards and modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: ESP32 Based
  • Processor: 32 Bit Xtensa dual Core — smooth, lag-free performance
  • Clock Frequency: 240MHz — smooth, flicker-free operation
  • WiFi Specs.: IEEE 802.11 b/g/n 2.4Ghz — fast, stable wireless internet
  • Bluetooth Version: 4.2 BR/EDR BLE — faster pairing, longer range, and lower battery draw
  • SRAM: 520kB
  • ROM Capacity: 448KB — plenty of room for files, apps, and media
  • GPIO: 34 , 4x SPI, 3x UART ,2x i2c, 2xI2S,RMT,LED PWM ,1 host SD/eMMc/SDIO

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This user guide will help you get started with ESP32-DevKitM-1 and will also provide more in-depth information. Espressif ESP32-DevKitM-1 Development board -based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Users can either connect peripherals with jumper wires or mount ESP32-DevKitM-1 on a breadboard.
   

Features:

  1. Easy to use
  2. ESP32-MINI-1 comes with an on-board PCB antenna
  3. The two modules both have a 4 MB flash in chip package
  4. Power regulator converts 5 V to 3.3 V.
  5. Single USB-UART bridge chip provides transfer rates up to 3 Mbps.
  6. 1 slave SDIO/SPI, ETHERNET

Package Includes:

1 x Espressif ESP32-DevKitM-1 Development board

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.