Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Spectra Symbol Flex Sensor-FS-L-055-253-MP 80mm Male Pins connector — image 1
Hover to zoom

1 / 3 · Click to enlarge

Spectra Symbol

Spectra Symbol Flex Sensor-FS-L-055-253-MP 80mm Male Pins connector

31+ bought in past month
AI Summary
Force and Flex Film Sensors for everyday users

The Spectra Symbol Flex Sensor-FS-L-055-253-MP 80mm Male Pins connector by Spectra Symbol is a value-for-money force and flex film sensors designed for everyday users. It features Sensor Length (mm): 80mm and Resistance (Ohm): Flat Resistance: 10K Ohms ±30%.

₹1,309
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,309
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Sensor Length (mm): 80mm
Resistance (Ohm): Flat Resistance: 10K Ohms ±30%
Power Rating: 0.5 Watts continuous; 1 Watt Peak.
Shipping Weight: 0.02 kg
Shipping Dimensions: 3 × 2 × 1 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-22341Category: Force and Flex Film Sensors

About This Product

The Spectra Symbol Flex Sensor-FS-L-055-253-MP 80mm Male Pins connector by Spectra Symbol is a value-for-money force and flex film sensors designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Sensor Length (mm): 80mm
  • Resistance (Ohm): Flat Resistance: 10K Ohms ±30%
  • Power Rating: 0.5 Watts continuous; 1 Watt Peak.
  • Shipping Weight: 0.02 kg
  • Shipping Dimensions: 3 × 2 × 1 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This is a Spectra Symbol Flex Sensor-FS-L-055-253-MP 80mm Male Pins connector.

A simple Flex Sensor 2.2" - Bend Sensor with a length of 2.2" which bends and flexes with a physical device. As the sensor is flex, the resistance across the sensor increases. A connector is 0.1" spaced and breadboard friendly. Applications in - Robotics, Gaming (Virtual Motion), Medical Devices, Computer Peripherals, Musical Instruments, Physical Therapy. Pricio.in

The flex sensor is a bend detecting sensor that has got numerous applications in robotics, medical and haptic technology. The resistance of these sensors changes in accordance with the bend, which can be measured using any microcontroller.
Note: The base of the sensor is sensitive to bending and may get damaged. Make sure that you bend only the sensing area.

Applications:
  1. Angle Displacement Measurement.
  2. Bends and Flexes physically with the motion device.
  3. Robotics Applications.
  4. Gaming (Virtual Motion).
  5. Medical Devices.
  6. Computer Peripherals.
  7. Musical Instruments.
  8. Physical Therapy.

Features:       

  1. Angle Displacement Measurement.
  2. Bends and Flexes physically with the motion device.
  3. Simple Construction.

Package Includes:

1 x SpectraSymbol Flex Sensor 2.2" Bend Sensor for Hand Gesture Recognition.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.