Geekworm X1004 PCIe to Dual 2280 NVMe SSD shield for Raspberry Pi 5 — image 1

Hover to zoom

1 / 3 · Click to enlarge

Geekworm X1004 PCIe to Dual 2280 NVMe SSD shield for Raspberry Pi 5

Name: Geekworm X1004 PCIe to Dual 2280 NVMe SSD shield for Raspberry Pi 5
Brand: Geekworm
SKU: R133376
Price: 5491 INR
Availability: InStock

22+ bought in past month

AI Summary

Multi-Brand Raspberry Pi Add on Boards (HATs) for everyday users

The Geekworm X1004 PCIe to Dual 2280 NVMe SSD shield for Raspberry Pi 5 by Geekworm is a premium multi-brand raspberry pi add on boards (hats) designed for everyday users. It features Item Type: Shield and Compatibility: Pi 5.

₹5,492

Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Quantity

Total: ₹5,492

Buying tip: A quality investment for dependable performance and premium build quality.

Estimated delivery: 16 Aug – 30 Aug

Check delivery date

Free Shipping

Pan India delivery

15-Day Returns

Hassle-free policy

Secure Payment

Razorpay protected

Quality Assured

Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Shield

Compatibility: Pi 5

Style: Classic

Color: Black

Model Series: X1004

Supported: Raspberry Pi 5

Ideal For

Everyday convenience

SKU: robu-2084592Category: Multi-Brand Raspberry Pi Add on Boards (HATs)

About This Product

The Geekworm X1004 PCIe to Dual 2280 NVMe SSD shield for Raspberry Pi 5 by Geekworm is a premium multi-brand raspberry pi add on boards (hats) designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

Item Type: Shield
Compatibility: Pi 5
Style: Classic
Color: Black
Model Series: X1004
Supported: Raspberry Pi 5 — compatible with modern devices
Shipping Weight: 0.07 kg
Shipping Dimensions: 12 × 9 × 3.5 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The X1004 is specifically designed to be placed on top of the Raspberry Pi 5, similar to a traditional HAT, and it provides a 40-pin header for easy access to the GPIO. With this NVMe shield, you can still use your favorite HATs alongside it. Additionally, it is fully compatible with the Raspberry Pi's official passive cooler, ensuring efficient heat dissipation. The inclusion of mounting holes and standoffs not only protects the solid-disk drives but also effectively dissipates heat for reliable performance. The built-in LED light indicates the status of reading or writing, eliminating any guesswork. Note: Raspberry Pi Board is Not Included.

Features:

Model: X1004
Compatible with Raspberry Pi 5 Only
M.2 NVMe dual SSD Shield for Raspberry Pi 5
Supports a total of 8TB storage capacity (4TB+4TB) with M.2 NVMe solid-state drives
Accommodates two full-size 2280 NVMe SSDs
Provides speedy data transfer with PCIe 2.0 5Gbps
Fully compatible with the Raspberry Pi official active cooler
LED indicators in blue display power and drive status
Designed to be attached on top, allowing stacking with other HATs
Powered via the 40-pin GPIO header & PCIe FFC
Compatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down

Package Includes:

1 x X1004 v1.1 Shield

1 x Scews Pack

Setup Guide

Identify the pins

Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.

Wire to your microcontroller

Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.

Install libraries

In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.

Upload example sketch

Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.

Calibrate if needed

Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.