Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Glass-sealed 100K Ohm NTC 3950 Thermistors 1% — image 1
Hover to zoom

Glass-sealed 100K Ohm NTC 3950 Thermistors 1%

24+ bought in past month
AI Summary
Thermistor Module for everyday users

The Glass-sealed 100K Ohm NTC 3950 Thermistors 1% is a value-for-money thermistor module designed for everyday users. It features Item Type: Thermistor and Length (mm): 30.

₹516
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹516
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 16 Aug30 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Thermistor
Length (mm): 30
Tolerance (%): ±1
Operating Temperature (°C): -80 to 150
Dimensions (L x W x H) mm: 2
Thermal Time Constant(s): 10

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1308059Category: Thermistor Module

About This Product

The Glass-sealed 100K Ohm NTC 3950 Thermistors 1% is a value-for-money thermistor module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Thermistor
  • Length (mm): 30
  • Tolerance (%): ±1
  • Operating Temperature (°C): -80 to 150
  • Dimensions (L x W x H) mm: 2
  • Thermal Time Constant(s): 10
  • Maximum Power Rating(W): 75 W
  • Temperature Coefficient: NTC

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Glass-sealed 100K Ohm NTC 3950 Thermistors 1%  (NTC-Negative Temperature Coefficient), these thermistors are small, high quality, epoxy encapsulated, precision devices. These epoxy-coated interchangeable chip thermistors offer true interchangeability over wide temperature ranges, permitting the circuit designer to standardize circuitry. This eliminates the need to individually adjust circuits and allows the thermistors to be easily replaced without the need for re-calibration.

Features:

  1. Temperature Coefficient Type: NTC
  2. Thermal Time Constant: 10s
  3. Resistance: 100kΩ
  4. Tolerance: ±1%
  5. Maximum Power Rating: 75mW
  6. Operating Temperature Range: -80°C ~ +150°C
  7. Dimensions(dia.): 2 mm

Packages Includes: 

1 x Glass-sealed 100K Ohm NTC 3950 Thermistors 1%

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.