Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SeeedStudio BMI088 Grove 6 Axis Accelerometer & Gyroscope — image 1
Hover to zoom

1 / 5 · Click to enlarge

Seeed Studio

SeeedStudio BMI088 Grove 6 Axis Accelerometer & Gyroscope

24+ bought in past month
AI Summary
Seeed Studio Modules for everyday users

The SeeedStudio BMI088 Grove 6 Axis Accelerometer & Gyroscope by Seeed Studio is a premium seeed studio modules designed for everyday users. It features Operating Voltage (VDC): 3.3 to 5 and Accelerometer Type: ?3g @10920 LSB/g, ?6g @5460 LSB/g, ?12g @2730 LSB/g, ?24g @1365 LSB/g.

₹5,252
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹5,252
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 16 Aug30 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Operating Voltage (VDC): 3.3 to 5
Accelerometer Type: ?3g @10920 LSB/g, ?6g @5460 LSB/g, ?12g @2730 LSB/g, ?24g @1365 LSB/g
Gyroscope: ?125?/s @262.1 LSB/?/s, ?250?/s @131.1 LSB/?/s, ?500?/s @65.5 LSB/?/s, ?1000?/s @32.8 LSB/?/s, ?2000?/s @16.4 LSB/?/s
Operating Temperature (°C): -40? ~ +85?
Interface: I2C
Batteries Required: Excluded

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-672603Category: Seeed Studio Modules

About This Product

The SeeedStudio BMI088 Grove 6 Axis Accelerometer & Gyroscope by Seeed Studio is a premium seeed studio modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Operating Voltage (VDC): 3.3 to 5 — works with standard household power
  • Accelerometer Type: ?3g @10920 LSB/g, ?6g @5460 LSB/g, ?12g @2730 LSB/g, ?24g @1365 LSB/g — plenty of room for files, apps, and media
  • Gyroscope: ?125?/s @262.1 LSB/?/s, ?250?/s @131.1 LSB/?/s, ?500?/s @65.5 LSB/?/s, ?1000?/s @32.8 LSB/?/s, ?2000?/s @16.4 LSB/?/s
  • Operating Temperature (°C): -40? ~ +85?
  • Interface: I2C — compatible with modern devices
  • Batteries Required: Excluded
  • Length (mm): 40
  • Width (mm): 20

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Grove - 6-Axis Accelerometer&Gyroscope(BMI088) is a 6 DoF(degrees of freedom) High-performance Inertial Measurement Unit(IMU).This sensor is based on BOSCH BMI088, which is a high-performance IMU with high vibration suppression. The 6-axis sensor combines a 16-bit triaxial gyroscope and a 16-bit triaxial accelerometer. Specially, you can use this sensor on the drone and robotics applications in demanding environments.

Pin Diagram


Features:

  1. The BM1088 is designed for drones, robotics and industrial applications with challenging performance requirements.
  2. Wide acceleration measurement range(up to 24g)
  3. The accelerometer features a low TCO of 0.2 mg/K and low spectral noise of only 230 pg/sqrt(Hz) in the widest measurement range of ± 24 g

Useful Links:

Tutorial


Package Includes:

1 x Grove - 6-Axis Accelerometer and Gyroscope (BMI088)

1 x Grove cable

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.