Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SeeedStudio Grove GPS (Air530) — image 1
Hover to zoom

1 / 5 · Click to enlarge

Seeed Studio

SeeedStudio Grove GPS (Air530)

38+ bought in past month
AI Summary
Drone GPS GNSS Modules and Antennas for everyday users

The SeeedStudio Grove GPS (Air530) by Seeed Studio is a mid-range drone gps gnss modules and antennas designed for everyday users. It features Item Type: GPS Module and Warm Start Time (s): 4s.

₹1,781
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,781
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: GPS Module
Warm Start Time (s): 4s
Time of cold boot: 30s
Operating Temperature (°C): -35°C-85°C
Storage Temperature (°C): -55°C-100°C
Positioning Time: Pure hardware cold start: 27.5s Pure hardware hot start :<1S Pure hardware recapture:<1S Software-assisted A-GNSS:<5S

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-765924Category: Drone GPS GNSS Modules and Antennas

About This Product

The SeeedStudio Grove GPS (Air530) by Seeed Studio is a mid-range drone gps gnss modules and antennas designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: GPS Module
  • Warm Start Time (s): 4s
  • Time of cold boot: 30s
  • Operating Temperature (°C): -35°C-85°C
  • Storage Temperature (°C): -55°C-100°C — plenty of room for files, apps, and media
  • Positioning Time: Pure hardware cold start: 27.5s Pure hardware hot start :<1S Pure hardware recapture:<1S Software-assisted A-GNSS:<5S
  • Shipping Weight: 0.03 kg
  • Shipping Dimensions: 5 × 4 × 1 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Confused about your GPS not working well in urban or outsides under only one or a few satellite module? Then you should not miss our new SeeedStudio Grove GPS (Air530). It’s a high-performance, highly integrated multi-mode satellite positioning and navigation module. It supports GPS / Beidou / Glonass / Galileo / QZSS / SBAS, which makes it suitable for GNSS positioning applications such as car navigation, smart wear, and drone.
Pinout 
Grove - GPS (Air530)
Applications :
  1. GPS tracker
  2. GPS navigation
  3. Distance measurement
  4. Car navigation
  5. Drone
Cautions :
  1. The input power supply voltage of Grove power supply interface, should not exceed 5.6V, otherwise, it may damage the device.
  2. The voltage of the selected button battery should not exceed 3V, or it will probably damage the device.

Useful link:

Grove- GPS (Air530)

Features:

  1. Positioning error within 10 meters
  2. Multi-mode satellite positioning & navigation and support more than 6 satellites at the same time
  3. The position still quickly and accurately under the condition of bad signal
  4. Low power consumption at only 31uA
  5. Compatible hard/soft interface for other modules
  6. Adopt the integrated design of RF baseband, which integrates DC/DC, LDO, LNA, RF front-end, baseband processing, 32-bit RISC based chip, RAM, FLASH storage, RTC and power management functions
  7. Cost-effective
  8. Compact size for easy deployment

Package Includes:

1 x Grove- GPS (Air530)

1 x Grove cable

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.