Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Holybro Micro M9N GPS With Case — image 1
Hover to zoom

1 / 5 · Click to enlarge

Holybro

Holybro Micro M9N GPS With Case

34+ bought in past month
AI Summary
Drone GPS GNSS Modules and Antennas for premium buyers

The Holybro Micro M9N GPS With Case by Holybro is a premium drone gps gnss modules and antennas designed for premium buyers. It features Item Type: GPS and No. of Concurrent GNSS: Up to 4 GNSS - BeiDou - Galileo - GLONASS - GPS - QZSS.

₹8,678
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹8,678
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 16 Aug30 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: GPS
No. of Concurrent GNSS: Up to 4 GNSS - BeiDou - Galileo - GLONASS - GPS - QZSS
Frequency Band: - GPS L1 - Galileo E1 - GLONASS L1 - BeiDou B1 - SBAS L1 - QZSS L1
Nav. update rate: Up to 25 Hz (4 concurrent GNSS)
Baud Rate (bps): 115200
Input Voltage (V): 4.7-5.2V

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1777626Category: Drone GPS GNSS Modules and Antennas

About This Product

The Holybro Micro M9N GPS With Case by Holybro is a premium drone gps gnss modules and antennas designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: GPS
  • No. of Concurrent GNSS: Up to 4 GNSS - BeiDou - Galileo - GLONASS - GPS - QZSS
  • Frequency Band: - GPS L1 - Galileo E1 - GLONASS L1 - BeiDou B1 - SBAS L1 - QZSS L1 — smooth, flicker-free operation
  • Nav. update rate: Up to 25 Hz (4 concurrent GNSS) — smooth, flicker-free operation
  • Baud Rate (bps): 115200
  • Input Voltage (V): 4.7-5.2V — works with standard household power
  • Current consumption: Less than 200mA @ 5V
  • Operating Temperature (°C): -40~80C

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Holybro Micro M9N GPS With Case uses multi-constellation GNSS powered by u-blox M9N, a concurrent GNSS receiver that can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS, Galileo, GLONASS, and BeiDou can be received concurrently. It also comes with the IST8310 compass. The high-gain 25 x 25 mm2 patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, a rechargeable backup battery for warm starts. Firmware Support for M10 GPS: PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.

Features

  1. Ublox M9N GNSS Reciever
  2. Accurate Positioning
  3. Fast Navigation Update Rate
  4. IST8310 Compass
  5. Small Form Factor

Package Includes:

1x Micro GPS module *1

1x JST GH 6 Position Connector 15 cm

1x JST-GH 6pin Colored Silicon Cable 15 cm

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.