Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
LANDZO Original 1GB HDMI/RCA Output,4 x USB 2.0  Raspberry Pi 3 Model B+, with WiFi & Bluetooth & TF Card — image 1
Hover to zoom

1 / 10 · Click to enlarge

LANDZO Original 1GB HDMI/RCA Output,4 x USB 2.0 Raspberry Pi 3 Model B+, with WiFi & Bluetooth & TF Card

5.02 ratings
AI Summary
Raspberry Pi & Orange Pi for premium buyers

The LANDZO Original 1GB HDMI/RCA Output,4 x USB 2.0 Raspberry Pi 3 Model B+, with WiFi & Bluetooth & TF Card is a premium raspberry pi & orange pi designed for premium buyers. It features One Package Weight: 0.09kgs / 0.21lb and One Package Size: 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch.

wireless convenience
₹6,126
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹6,126
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.09kgs / 0.21lb
One Package Size: 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch
Best Sellers Rank (Consumer Electronics): #6888
Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #134
Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies > Raspberry Pi Accessories): #13

Ideal For

Hobbyist flyingOutdoor recreationKids entertainment
Share:
SKU: S-DIY8971Category: Raspberry Pi & Orange Pi

About This Product

The LANDZO Original 1GB HDMI/RCA Output,4 x USB 2.0 Raspberry Pi 3 Model B+, with WiFi & Bluetooth & TF Card is a premium raspberry pi & orange pi designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.09kgs / 0.21lb
  • One Package Size: 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch
  • Best Sellers Rank (Consumer Electronics): #6888
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #134
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies > Raspberry Pi Accessories): #13

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Pi 3 compared to Pi 2 1. More processor speed. The CPU on the Pi 3 is one and a half times faster at 1.2 GHz. Your Pi board performs better. 2. On-board connectivity. The Pi 3 features 802.11 b/g/n Wireless LAN and Bluetooth Classic & Low Energy (BLE). You can get connected much quicker without the need for any external device. 3. 2.5 A power supply. With more processor speed and on-board connectivity, youll need more power. Power supplies for previous Pi boards will not be sufficient. You will need the Official Raspberry Pi Power Supply 4. New components. The Pi 3 features a chip antenna where status LEDs were located previously. The status LEDs are still on the board, right next to the microSD card slot.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.