LILYGO® TTGO T5 WiFi Wireless Module bluetooth Base ESP-32 ESP32 2.13 e-Paper Display Development Board

the version i received is 2.3... none of the libraries out there work! help! can someone post the correct library for this version? (2.3)

have you find a case for this display with battery location?

Is there a maximum limit of writing on the display?how much is the estimated total duration of hours in optimal conditions?the total duration can decrease if the display is continuously refreshed every x sec?

Any trick to use the SD card?The SPI is worling well with the ePaper display, but not with the SD card.

Have the power management problems (described in the comments at https://youtu.be/CiG3z0n3bw8) been fixed?

Can install Meshtastic on this board?

What is the purpose of the on/off switch?

Does this display support partial refresh?

I would like to power using battery. which one would you suggest?

My displays are not completely erased. Shadow images remain. What am I doing wrong?

HelloI have following Version DEPG0213BN I buyed for few day over CZ the onboard demo worked.I using the GxEPD_MinimumExample with#include // 2.13 b/w form DKE GROUPbut I get following Error: Do you now a solution ? Thank you !In file included from C:UsersrudolDocumentsArduinolibrariesGxEPD-mastersrc/GxEPD.h:20:0, from C:UsersrudolDocumentsArduinoGxEPD_Minimum_Test_2GxEPD_Minimum_Test_2.ino:3:C:UsersrudolDocumentsArduinolibrariesGxEPD-mastersrc/GxFont_GFX.h:77:13: error: 'int16_t GxFont_GFX::getUTF8Width(const char*)' cannot be overloaded int16_t getUTF8Width(const char *str); ^C:UsersrudolDocumentsArduinolibrariesGxEPD-mastersrc/GxFont_GFX.h:45:13: error: with 'int16_t GxFont_GFX::getUTF8Width(const char*)' int16_t getUTF8Width(const char *str); ^exit status 1Error compiling for board ESP32 Dev Module.

the board shows correctly on Win10/DeviceManager as CP210x UART on COM3 but trying to upload an sketch gets serial.serialutil.SerialException: could not open port 'COM3': WindowsError(121, 'The semaphore timeout period has expired.') Failed to execute script esptool the selected serial port

why is there no support for the current display??

My display is FPC-752AB. Is this even supportedjQuery1113036444693507787984_1622950710207?

How much is the Deep Sleep current in Micro ampere?

it seems that grapic resolution is 250x128 (NOT 122 as described) . Is this correct?

What target board should we use in Arduino?

Can Anybody share an Arduino IDE sample which is working with this display? I have all the libraries wich is required, but the display does not seem to react any config change.

Can i turn off the blue on board LED?

the size ?