MakersBase MKS UPS24V For Power Outage Detection 3D Printer Parts

Makerbase MKS UPS module is used to lift the Z axis when the power is off. It can remove the extruder from the model to protect the model. Working Process: 1. When the AC power supply is cut off, the MKS UPS detects it and sends a signal to the motherboard; 2. The power stored in the MKS UPS and PSU continues to supply power to the motherboard; 3. Motherboard detects the power-off signal, stops printing, turns off hotbed and hotend, lifts z-axis; 4. The power stored in MKS UPS is generally lifted z-axis 20mm-200mm; 5. When the power supply is restored, resume printing through the 12864/2004 LCD screen. Note: -MKS UPS24V can only be used for DC 24V power. -Motherboard needs to use Marlin2.0 firmware with 12864/2004 LCD screen. -Temporarily does not support MKS Robin series (except Robin E3 / E3D) and MKS TFT screen. -MKS UPS12V and MKS UPS24V modules detect external AC power supply.  

---

Features:

1. 24V DC power supply for compatibility with various devices.
2. Multiple output ports for simultaneous power supply to multiple devices.
3. User-friendly interface with LCD display or LED indicators
4. Battery monitoring for real-time status updates.
5. Acts as an uninterruptible power supply (UPS) for backup power during outages.

---

Packages Includes:

1 x MakersBase-MKS UPS24V For Power Outage Detection 3D Printer Parts 2 x Power Cable 1 x 3 Pin Motherboard Cable