MPY20-A112T MemsFrontier Infrared pyroelectric gas sensor (CO2) — image 1

Hover to zoom

1 / 2 · Click to enlarge

MPY20-A112T MemsFrontier Infrared pyroelectric gas sensor (CO2)

Name: MPY20-A112T MemsFrontier Infrared pyroelectric gas sensor (CO2)
Brand: MemsFrontier
SKU: R149787
Price: 5461 INR
Availability: InStock

23+ bought in past month

AI Summary

Gas Sensors for everyday users

The MPY20-A112T MemsFrontier Infrared pyroelectric gas sensor (CO2) by MemsFrontier is a premium gas sensors designed for everyday users. It features Item Type: Gas Sensor and Model No. / Name: MPY20 A112T.

₹5,462

Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Quantity

Total: ₹5,462

Buying tip: A quality investment for dependable performance and premium build quality.

Estimated delivery: 17 Aug – 31 Aug

Check delivery date

Free Shipping

Pan India delivery

15-Day Returns

Hassle-free policy

Secure Payment

Razorpay protected

Quality Assured

Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Gas Sensor

Model No. / Name: MPY20 A112T

Operating Voltage (V): 2 to 12

Operating Temperature (°C): -40~80

Storage Temperature (°C): -40~80

Shipping Weight: 0.01 kg

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping

SKU: robu-2153782Category: Gas Sensors

About This Product

The MPY20-A112T MemsFrontier Infrared pyroelectric gas sensor (CO2) by MemsFrontier is a premium gas sensors designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

Item Type: Gas Sensor
Model No. / Name: MPY20 A112T
Operating Voltage (V): 2 to 12 — works with standard household power
Operating Temperature (°C): -40~80
Storage Temperature (°C): -40~80 — plenty of room for files, apps, and media
Shipping Weight: 0.01 kg
Shipping Dimensions: 5 × 4 × 2 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The MPY20-A112T series pyroelectric sensor uses lithium tantalate single crystal as the sensitive element material. The Curie temperature of the lithium tantalate crystal material is above 600°C. It has a small relative dielectric constant and a high specific detection rate. It can operate in a wide range of room temperature. Within the temperature range, the pyroelectric coefficient of the material changes very little with temperature, and the temperature change rate of the output signal is only 1-2‰. The temperature stability of the sensor is very good, and the spectral response consistency is good within the wavelength range of 1~20um. Note: This Module does not come with a connector or converter. The actual product may vary slightly variation with the image shown. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

Dual channel
thermal compensation
Voltage mode
TO-39 package
JFET

Applications:

Medical industry
Home electronics
Security career
Industrial production

Package Includes:

1 x MemsFrontier Infrared pyroelectric gas sensor(CO2) MPY20-A112T

Setup Guide

Identify the pins

Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.

Wire to your microcontroller

Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.

Install libraries

In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.

Upload example sketch

Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.

Calibrate if needed

Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.