Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
MIKROE CO Click (MIKROE‑1626) – MQ‑7 Carbon Monoxide (CO) Gas Sensor Board, Analog, mikroBUS, Range: 20~2000 ppm — image 1
Hover to zoom

1 / 4 · Click to enlarge

MIKROE

MIKROE CO Click (MIKROE‑1626) – MQ‑7 Carbon Monoxide (CO) Gas Sensor Board, Analog, mikroBUS, Range: 20~2000 ppm

36+ bought in past month
AI Summary
Mikroe Modules for everyday users

The MIKROE CO Click (MIKROE‑1626) – MQ‑7 Carbon Monoxide (CO) Gas Sensor Board, Analog, mikroBUS, Range: 20~2000 ppm by MIKROE is a mid-range mikroe modules designed for everyday users. It features Item Type: Gas Sensor and Power Supply Voltage (V): 5.

₹1,741
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,741
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Gas Sensor
Power Supply Voltage (V): 5
On-Board Sensors (Y/N): MQ-7 sensor
Sensor range: MQ-7 20ppm-2000ppm of CO
Onboard: potentiometer
Shipping Weight: 0.05 kg

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1314935Category: Mikroe Modules

About This Product

The MIKROE CO Click (MIKROE‑1626) – MQ‑7 Carbon Monoxide (CO) Gas Sensor Board, Analog, mikroBUS, Range: 20~2000 ppm by MIKROE is a mid-range mikroe modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Gas Sensor
  • Power Supply Voltage (V): 5 — works with standard household power
  • On-Board Sensors (Y/N): MQ-7 sensor
  • Sensor range: MQ-7 20ppm-2000ppm of CO — reliable connection even at a distance
  • Onboard: potentiometer
  • Shipping Weight: 0.05 kg
  • Shipping Dimensions: 6 × 4 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

MIKROE CO Click (MIKROE‑1626) carries the MQ-7 gas sensor with high sensitivity to carbon monoxide. The click is designed to run on a 5V power supply only. It communicates with the target microcontroller over the AN pin on the mikroBUS™ line. The board also features a calibration potentiometer, a mikroBUS™ host socket, two jumpers, and a power indicator LED. MQ-7 sensor features The MQ-7 sensor has a high sensitivity to carbon monoxide. The gas sensing layer on the sensor unit is made of Tin dioxide (SnO2), which has lower conductivity in clean air. The conductivity increases as the levels of Carbon monoxide rise. The detection range of the sensor is 20ppm-2000ppm of CO.

Features:

  1. MQ-7 sensor range: 20ppm-2000ppm of CO
  2. Onboard potentiometer for calibration
  3. Communicates over the AN pin
  4. 5V power supply

Useful Links:
  1. Click Boards
  2. MikroBUS
  3. CO click example on Libstock
  4. MQ-7B datasheet

Package Includes:

1 x MIKROE CO Click (MIKROE‑1626) – MQ‑7 Carbon Monoxide (CO) Gas Sensor Board, Analog, mikroBUS, Range: 20~2000 ppm

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.