Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Piezoresistive differential pressure sensor APR5852 Range (-10~10kPa) — image 1
Hover to zoom

1 / 4 · Click to enlarge

ASAIR

Piezoresistive differential pressure sensor APR5852 Range (-10~10kPa)

29+ bought in past month
AI Summary
Pressure Sensors for everyday users

The Piezoresistive differential pressure sensor APR5852 Range (-10~10kPa) by ASAIR is a value-for-money pressure sensors designed for everyday users. It features Pressure Type: Differential and Pressure Range: -10 kPa to 10 kPa.

₹1,387
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,387
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Pressure Type: Differential
Pressure Range: -10 kPa to 10 kPa
Sensor Type: MEMS piezoresistive differential pressure sensor
Output Type: Analog Voltage
Application: HVAC and industrial low-pressure differential sensing
Output Zero Pressure (V): 2.5

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1443646Category: Pressure Sensors

About This Product

The Piezoresistive differential pressure sensor APR5852 Range (-10~10kPa) by ASAIR is a value-for-money pressure sensors designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Pressure Type: Differential
  • Pressure Range: -10 kPa to 10 kPa — reliable connection even at a distance
  • Sensor Type: MEMS piezoresistive differential pressure sensor
  • Output Type: Analog Voltage — works with standard household power
  • Application: HVAC and industrial low-pressure differential sensing
  • Output Zero Pressure (V): 2.5
  • Output Positive Pressure (V): 4.5
  • Response Time (uS): 2000

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

APR5852 features a dedicated ASIC sensor chip, silicon microstructured pressure sensor, and analog output. APR5852 high-performance pressure sensor can be directly mounted on a standard PCB board, after amplification, high accuracy, and calibrated pressure signal through the analog output. Each sensor is rigorously calibrated and tested to ensure and meet customers' large-scale applications.

Applications:

APR5852 can be used in consumer, electronics, medical, automotive, industrial, meteorological and other fields. It can also be used in equipment such as HVAC, respirator, and ventilation equipment products, testing and inspection equipment, and other related differential pressure detection and control products.


Features:

  1. Analog voltage output
  2. Strong anti-interference ability
  3. Easy to use with the dual row pin design
  4. Full calibration

Package Includes:

1 x Piezoresistive differential pressure sensor APR5852 Range (-10~10kPa)

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.