Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Reed Switch 2×14mm Normally Open Magnetic Sensor (10 pcs) — image 1
Hover to zoom

1 / 3 · Click to enlarge

Reed Switch 2×14mm Normally Open Magnetic Sensor (10 pcs)

4.73 ratings
472+ bought in past month
AI Summary
Vibration/Tilt Sensor and Modules for everyday users

The Reed Switch 2×14mm Normally Open Magnetic Sensor (10 pcs) is a value-for-money vibration/tilt sensor and modules designed for everyday users. It features Model No. / Name: Reed Switch and Frequency (Hz): 100.

₹609
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹609
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Reed Switch
Frequency (Hz): 100
Mech. Electrical Lifecycle: ≈ 100,000
Contact Resistance (ohm): 20mΩ
Insulation Resistance (MOhm): 100
Operating Temperature (°C): -50 to 140

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-44305Category: Vibration/Tilt Sensor and Modules

About This Product

The Reed Switch 2×14mm Normally Open Magnetic Sensor (10 pcs) is a value-for-money vibration/tilt sensor and modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Reed Switch
  • Frequency (Hz): 100 — smooth, flicker-free operation
  • Mech. Electrical Lifecycle: ≈ 100,000
  • Contact Resistance (ohm): 20mΩ
  • Insulation Resistance (MOhm): 100
  • Operating Temperature (°C): -50 to 140
  • Length (mm): 14
  • Width (mm): 2 (Body Diameter)

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This is Reed Switch 2 x 14 mm Magnetic Control Switch with Normally Open Contact. When the device is exposed to a magnetic field, the two ferrous pins inside the switch pull together and the switch closes. When the magnetic field is removed, The Reed Switch separates and the switch opens. This makes for a great non-contact switch. This switch can carry up to 1.2A. This small and easy to use module can be used in a variety of environmental conditions, it operates very reliably in the -50°C to +140°C temperature range.

Features :

  1. Small Module.
  2. Very easy to use.
  3. Direct connection in the circuit.

Package Includes :

10 x Reed Switch 2 x 14 mm Magnetic Control Switch

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.