Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Renke SHT-77 Temperature Sensor Probe For (SHT35), 77mm Length — image 1
Hover to zoom

1 / 3 · Click to enlarge

Renke

Renke SHT-77 Temperature Sensor Probe For (SHT35), 77mm Length

31+ bought in past month
AI Summary
Temperature Sensor Probes for everyday users

The Renke SHT-77 Temperature Sensor Probe For (SHT35), 77mm Length by Renke is a mid-range temperature sensor probes designed for everyday users. It features Shipping Weight: 0.102 kg and Shipping Dimensions: 15 × 14 × 4 cm.

₹4,709
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹4,709
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Shipping Weight: 0.102 kg
Shipping Dimensions: 15 × 14 × 4 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-3383336Category: Temperature Sensor Probes

About This Product

The Renke SHT-77 Temperature Sensor Probe For (SHT35), 77mm Length by Renke is a mid-range temperature sensor probes designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Shipping Weight: 0.102 kg
  • Shipping Dimensions: 15 × 14 × 4 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Renke SHT-77 is a 77mm temperature and humidity sensor probe based on the Sensirion SHT35 digital sensor. It provides highly accurate environmental measurements with factory-calibrated digital output and is suitable for HVAC systems, industrial automation, environmental monitoring, agriculture, and IoT applications. The extended probe length enables deeper insertion into ducts, chambers, and equipment while maintaining reliable long-term sensing performance.


Features:

  1. Built with advanced SHT35 digital sensing technology.
  2. Fully calibrated for accurate and reliable measurements.
  3. Fast response time for real-time environmental monitoring.
  4. High long-term stability for continuous operation.
  5. Low power consumption for energy-efficient applications.
  6. Compact probe design for easy installation and integration.
  7. Suitable for industrial, commercial, and research environments.
  8. Reliable performance in automation, HVAC, agriculture, and IoT applications.

Specifications:

  1. Sensor Element: SHT35
  2. Probe Length: 77mm
  3. Measured Parameters: Temperature & Humidity
  4. Output Signal: Digital Output
  5. Communication Interface: I2C
  6. I2C Communication Speed: Up to 1MHz
  7. Operating Voltage: 2.4V to 5.5V DC
  8. Temperature Accuracy: ±0.1°C (Typical)
  9. Humidity Accuracy: ±1.5% RH (Typical)
  10. Operating Temperature Range: -40°C to +125°C
  11. Storage Temperature Range: -40°C to +150°C

Package Includes:

1 x Renke SHT-77 Temperature Sensor Probe For (SHT35), 77mm Length

 

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.