Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Seeed Studio Grove Pro Temperature & Humidity Sensor — image 1
Hover to zoom

1 / 4 · Click to enlarge

Seeed Studio

Seeed Studio Grove Pro Temperature & Humidity Sensor

36+ bought in past month
AI Summary
Temperature and Humidity Sensor for everyday users

The Seeed Studio Grove Pro Temperature & Humidity Sensor by Seeed Studio is a mid-range temperature and humidity sensor designed for everyday users. It features Item Type: Sensor and Model No. / Name: Temperature and Humidity Sensor.

₹1,773
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,773
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Sensor
Model No. / Name: Temperature and Humidity Sensor
Rated Voltage (VDC): 5
Interface: Analog
Response Time (uS): 6 -20μS
Shipping Weight: 0.01 kg

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1135218Category: Temperature and Humidity Sensor

About This Product

The Seeed Studio Grove Pro Temperature & Humidity Sensor by Seeed Studio is a mid-range temperature and humidity sensor designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Sensor
  • Model No. / Name: Temperature and Humidity Sensor
  • Rated Voltage (VDC): 5 — works with standard household power
  • Interface: Analog — compatible with modern devices
  • Response Time (uS): 6 -20μS
  • Shipping Weight: 0.01 kg
  • Shipping Dimensions: 14 × 9 × 1 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Grove - DHT22 is a high accuracy temperature and humidity sensor based on the DHT22 module (also known as AM2302 or RHT03). High-cost performance and high precision make it ideal for temperature and humidity monitoring of Arduino and Raspberry Pi, you can also use it to make a thermometer and hygrometer.
The DHT22 includes a capacitive humidity sensor and a high precision temperature sensor. The range of humidity sensor is 0 to 99.9 %RH with ±2% accuracy while the temperature sensor ranges from -40 to 80℃ with ±0.5℃ accuracy. With the help of a built-in 8-bit microcontroller, the DHT22 converts the analogue output of those two sensors to the digital signal, and outputs both temperature and humidity data via a single pin.
Note : Actual product may vary in terms of version printed on it.
Getting started with SeeedStudio Grove Temperature&Humidity Sensor Pro

Features:

  1. Small
  2. Very sensitive
  3. Energy efficient
  4. Maximum response time of 20 seconds
  5. Measures temperature between -40 and 80 °C (+/- 0.5 °C)
  6. Measures humidity between 5 and 99% (+/-2%)

Package Includes :

1 x SeeedStudio Grove Temperature&Humidity Sensor Pro 1 x JST cable 1 x  User Manual

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.