Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Sim800C GPRS/GSM Shield with Antenna — image 1
Hover to zoom

1 / 2 · Click to enlarge

Sim800C GPRS/GSM Shield with Antenna

32+ bought in past month
AI Summary
GSM GPRS and GNSS Modules for everyday users

The Sim800C GPRS/GSM Shield with Antenna is a mid-range gsm gprs and gnss modules designed for everyday users. It features Item Type: Sim800 Type and Antenna Type: finger antenna.

₹1,566
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,566
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 16 Aug30 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Sim800 Type
Antenna Type: finger antenna
Shipping Weight: 0.07 kg
Shipping Dimensions: 12 × 8 × 4 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-311729Category: GSM GPRS and GNSS Modules

About This Product

The Sim800C GPRS/GSM Shield with Antenna is a mid-range gsm gprs and gnss modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Sim800 Type
  • Antenna Type: finger antenna
  • Shipping Weight: 0.07 kg
  • Shipping Dimensions: 12 × 8 × 4 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Sim800C GPRS/GSM Shield with Antenna provides you with a way to use the GSM phone network to receive data from a remote location,and it is compatible with all boards which have the same form factor (and pinout) as a standard Arduino Board. This shield can also be applied to DIY phones for calling, receiving and sending messages, making GPS trackers or other applications like Smart home, etc.

SIM800C GPRS/GSM Shield delivers GSM/GPRS850/900/1800/1900MHz signals for Audio, SMS and GPRS Service. Also, it runs at the low power consumption of about 0.6mA in sleep mode but acts compliant to GSM phase 2/2+: Class 4 (2 W @850/ 900 MHz), Class 1 (1 W @ 1800/1900MHz) with a two-in-one headset jack.

What’s more, to make your project more flexible and efficient, we have prepared two different antennas for you. One is the traditional GPRS antenna which is more sensitive while another one is an onboard antenna which is more compact and easy to install.


Features:

  1. Quad-Band 850/ 900/ 1800/ 1900 MHz
  2. GPRS multi-slot class 10/12
  3. GPRS mobile station class B
  4. Compliant to GSM phase 2/2+
  5. Onboard Provision for Mic and Speaker.

Specifications:

  1. Chip used: QUAD BAND SIM800C GSM CHIP.
  2. Arduino compatibility: Arduino UNO R3, Arduino Mega etc.
  3. Antenna type: finger antenna.
  4. Output: TTL and RS232 serial output.
  5. Simcard holder: standard size.
  6. Buzzer for CALL and SMS indication.
  7. Indication LEDs PWR - Power Indication STS - Status Indication NTW - Network Indication
  8. PINOUTS: o2 - RX o3 – TX
  9. Provision for the headphone jack, mic, and speaker.

Package Includes:

1 x Sim800C GPRS/GSM Shield with Antenna.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.