Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SmartElex Multi USB/RS232/RS485-TTL/CONVERTER — image 1
Hover to zoom

1 / 3 · Click to enlarge

SmartElex

SmartElex Multi USB/RS232/RS485-TTL/CONVERTER

29+ bought in past month
AI Summary
SmartElex Programmer Modules for everyday users

The SmartElex Multi USB/RS232/RS485-TTL/CONVERTER by SmartElex is a value-for-money smartelex programmer modules designed for everyday users. It features Interface: USB, TTL, RS232, RS485 and Data Transfer Rate: 300 baud to 3 Mbaud.

₹1,031
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,031
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Interface: USB, TTL, RS232, RS485
Data Transfer Rate: 300 baud to 3 Mbaud
Shipping Weight: 0.02 kg
Shipping Dimensions: 7 × 5 × 3 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2300010Category: SmartElex Programmer Modules

About This Product

The SmartElex Multi USB/RS232/RS485-TTL/CONVERTER by SmartElex is a value-for-money smartelex programmer modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Interface: USB, TTL, RS232, RS485 — compatible with modern devices
  • Data Transfer Rate: 300 baud to 3 Mbaud
  • Shipping Weight: 0.02 kg
  • Shipping Dimensions: 7 × 5 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Multiplexer has a set of interfaces for a variety of multi-function adapter plates. It supports USB, TTL, RS232, and RS485 interfaces between the system conversions. What’s more powerful is that it also supports one input and multiple outputs, which greatly facilitates the communication between various controllers. Tip: The Multiplexer board is divided into A and B interfaces. The signal can be converted between A and B. The signal in the same interface can’t be converted thus only one sender in the same interface, but it allows to have multiple receivers.

Features:

  1. Single chip USB to asynchronous serial data transfer interface.
  2. Unique USB FTDIChip-ID™ feature.
  3. Configurable CBUS I/O pins.
  4. Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232 ) at TTL levels.
  5. The entire USB protocol is handled on the chip. No USB-specific firmware programming is required.

Package Includes:

1 x SmartElex Multi USB/RS232/RS485-TTL/CONVERTER

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.