SmartElex u-blox GNSS MAX-M10S

The SmartElex MAX-M10S Breakout is an ultra-low-power, high performance, miniaturized GNSS board that is perfect for battery operated applications that don't possess a lot of space, such as asset trackers and wearable devices. The MAX-M10S module from u-blox has an extremely low power consumption that is less than 25mW in continuous tracking mode. The on-board MAX-M10S GNSS receiver can receive signals from the GPS, GLONASS, BeiDou, and Galileo constellations. Thanks to the u-blox Super-S technology, the module offers improved RF sensitivity with small antennas and in non-line-of-sight scenarios. We've included an SMA connector for a sturdy connection when attaching an external antenna. The board is also equipped with an on-board rechargeable battery that provides backup power to the module's RTC. This reduces the time-to-first fix from a cold start (~24s) to a hot start (~1s). The battery will maintain RTC and GNSS orbit data without being connected to power for up to five hours. This increases precision and decreases lock time in battery operated devices without compromising GNSS performance. We broke out 0.1"-spaced pins in case you prefer to use a breadboard. For users that prefer to communicate over UART, we made sure to configure the UART pin grouping to an industry standard to ensure that it easily connects to a Serial Basic. U-blox based GNSS products are configurable using the popular Windows program called u-center. Plenty of different functions can be configured on the MAX-M10S: baud rates, update rates, spoofing detection, external interrupts, etc. Note: The I2C address of the MAX-M10S is 0x42 and is software configurable. A multiplexer/Mux is required to communicate to multiple MAX-M10S boards with the same address on a single bus.

---

Features:

•  1.5m Horizontal Accuracy
•  10Hz Max Update Rate
•  Hot: 1sMax Altitude: 80,000m
•  Max G: ≤4
•  Max Velocity: 500m/s
•  Velocity Accuracy: 0.05m/s
•  Heading Accuracy: 0.3 degrees
•  Time Pulse Accuracy: 30ns
•  3.3V VCC and I/O
•  Current Consumption: ~6mA to ~25mA (varies with constellations and tracking state)
•  Supports NMEA and UBX protocols over I2C or UART interfaces

---

Package Includes: 

1 x SmartElex u-blox GNSS MAX-M10S

3 x Male Headers

1 x Connector