Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4 — image 1
Hover to zoom

1 / 6 · Click to enlarge

WAVESHARE

Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4

26+ bought in past month
AI Summary
Multi-Brand Raspberry Pi Add on Boards (HATs) for everyday users

The Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4 by WAVESHARE is a mid-range multi-brand raspberry pi add on boards (hats) designed for everyday users. It features Item Type: Other Board and Compatibility: CM4.

₹2,231
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,231
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 16 Aug30 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Other Board
Compatibility: CM4
Board Type: Baseboard
Supported: Socket for CM4 Variants
Networking: Gigabit Ethernet RJ45 connector
Connector Type: Raspberry Pi 40PIN GPIO header × 1

Ideal For

Everyday convenience
Share:

About This Product

The Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4 by WAVESHARE is a mid-range multi-brand raspberry pi add on boards (hats) designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Other Board
  • Compatibility: CM4
  • Board Type: Baseboard
  • Supported: Socket for CM4 Variants — compatible with modern devices
  • Networking: Gigabit Ethernet RJ45 connector — compatible with modern devices
  • Connector Type: Raspberry Pi 40PIN GPIO header × 1 — compatible with modern devices
  • USB: Raspberry Pi 40PIN GPIO header × 1
  • Display: MIPI DSI port × 1 (15pin 1.0mm FPC connector) — crisp, vibrant visuals in any lighting

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This is Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4. The Differences. Although the Raspberry Pi Compute Module 4 has the same computing power as the Raspberry Pi 4, one can think of the Raspberry Pi Compute Module as a stripped-down version of the Raspberry Pi 4 with no ports. So, a carrier board is necessary to use the Compute Module The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products

Features:

  1. Micro SD card slot
  2. CSI interface
  3. USB2.0 interface
  4. Easy to use
  5. Color: green
  6. Raspberry Pi Compute Module 4
  7. 40PIN GPIO interface
  8. PWR indicator
  9. ACT indicator
  10. AMS1117-3.3
  11. BOOT switch

Useful link:

Waveshare Nano Base Board (B)

Package Includes:

1 x Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.