Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Waveshare Raspberry Pi OLED/LCD HAT, Onboard 2inch IPS LCD Main Screen and Dual 0.96inch Blue OLED Secondary Screens — image 1
Hover to zoom

1 / 4 · Click to enlarge

WAVESHARE

Waveshare Raspberry Pi OLED/LCD HAT, Onboard 2inch IPS LCD Main Screen and Dual 0.96inch Blue OLED Secondary Screens

39+ bought in past month
AI Summary
OLED Display for everyday users

The Waveshare Raspberry Pi OLED/LCD HAT, Onboard 2inch IPS LCD Main Screen and Dual 0.96inch Blue OLED Secondary Screens by WAVESHARE is a mid-range oled display designed for everyday users. It features Display Size (Inch): 2 and Display Resolution (pixel): 240 × 320.

₹2,099
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,099
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 16 Aug30 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Display Size (Inch): 2
Display Resolution (pixel): 240 × 320
Display Color: 262k color
Communication Mode: SPI
Driver: st7789vw
Shipping Weight: 0.038 kg

Ideal For

Everyday convenience
Share:
SKU: robu-1782920Category: OLED Display

About This Product

The Waveshare Raspberry Pi OLED/LCD HAT, Onboard 2inch IPS LCD Main Screen and Dual 0.96inch Blue OLED Secondary Screens by WAVESHARE is a mid-range oled display designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Display Size (Inch): 2 — crisp, vibrant visuals in any lighting
  • Display Resolution (pixel): 240 × 320 — crisp, vibrant visuals in any lighting
  • Display Color: 262k color — crisp, vibrant visuals in any lighting
  • Communication Mode: SPI
  • Driver: st7789vw
  • Shipping Weight: 0.038 kg
  • Shipping Dimensions: 9 × 8 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Raspberry Pi OLED/LCD HAT, Onboard 2inch IPS LCD Main Screen And Dual 0.96inch Blue OLED Secondary Screens, With 40PIN GPIO Header, Compatible With Raspberry Pi Series Boards

Features:

  1. Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards
  2. 2inch IPS LCD Main Screen with built-in ST7789VW driver chip, SPI interface communication, wide viewing angle,
  3. supports 262K color display, 240×320 resolution
  4. Dual 0.96inch OLED secondary screens with built-in SSD1315 driver chip, I2C interface communication, blue
  5. display color, 128×64 resolution can be used to display key information, status indicator messages or small graphics
  6. Onboard 4x user-defined keys for extended applications
  7. Comes with online development resources and a manual (Raspberry Pi/VisionFive2/Arduino/STM32, etc.)

Package Includes:

1 x Waveshare Raspberry Pi OLED/LCD HAT, Onboard 2inch IPS LCD Main Screen and Dual 0.96inch Blue OLED Secondary Screens

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.