Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
WeAct Studio CH552T Mini Core Board Learning Development WCH MCS51 DIP20 TSSOP20 — image 1
Hover to zoom

1 / 2 · Click to enlarge

WeAct Studio

WeAct Studio CH552T Mini Core Board Learning Development WCH MCS51 DIP20 TSSOP20

31+ bought in past month
AI Summary
IoT Development Boards for everyday users

The WeAct Studio CH552T Mini Core Board Learning Development WCH MCS51 DIP20 TSSOP20 by WeAct Studio is a value-for-money iot development boards designed for everyday users. It features ROM Capacity: 16KB and RAM: 256 bytes.

compact and portable
₹671
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹671
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

ROM Capacity: 16KB
RAM: 256 bytes
Compatibility: Keil, SDCC, Arduino
Shipping Weight: 0.01 kg
Shipping Dimensions: 5 × 5 × 2 cm

Ideal For

Everyday convenience
Share:
SKU: robu-1990775Category: IoT Development Boards

About This Product

The WeAct Studio CH552T Mini Core Board Learning Development WCH MCS51 DIP20 TSSOP20 by WeAct Studio is a value-for-money iot development boards designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • ROM Capacity: 16KB — plenty of room for files, apps, and media
  • RAM: 256 bytes — effortless multitasking
  • Compatibility: Keil, SDCC, Arduino
  • Shipping Weight: 0.01 kg
  • Shipping Dimensions: 5 × 5 × 2 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The CH552 is an enhanced E8051 kernel microcontroller, fully compatible with the MCS51 instruction set, offering significant improvements in speed and functionality. With 79% of its instructions being single-byte single-cycle instructions, the CH552 delivers an average instruction speed that is 8 to 15 times faster than standard MCS51 devices. This microcontroller supports a system frequency of up to 24MHz and includes 16KB of program ROM, 256 bytes of internal iRAM, and 1KB of in-chip xRAM with DMA capability.

Features:

  1. Enhanced E8051 kernel with MCS51 instruction set compatibility
  2. High-speed operation with up to 24MHz system frequency.
  3. Built-in ADC for analog-to-digital conversion and touch key capacitance detection.
  4. Three groups of timers for signal capture and PWM.
  5. Integrated peripherals including dual asynchronous serial ports, SPI, and USB device controller.
  6. Development Support: Compatible with Keil, Arduino, and SDCC environments.
  7. Programming and Download Options: Supports USB download and serial port download.
  8. Development Modes: Supports Keil lighting examples, RTXTiny2, Arduino lighting routines, SDCC examples, and more.

Package Includes:

1 x WeAct Studio CH552T Mini Core Board Learning Development WCH MCS51 DIP20 TSSOP20

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.