Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Winsen F1031V Micro Flow Sensor for Ventilation – 150 SLM — image 1
Hover to zoom
Winsen

Winsen F1031V Micro Flow Sensor for Ventilation – 150 SLM

4.01 rating
605+ bought in past month
AI Summary
Flow Sensors for premium buyers

The Winsen F1031V Micro Flow Sensor for Ventilation – 150 SLM by Winsen is a premium flow sensors designed for premium buyers. It features Model No. / Name: Flow Sensor and Operating Voltage (VDC): 14.

₹10,120
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹10,120
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Flow Sensor
Operating Voltage (VDC): 14
Output Impedance: 1000 Ω
Operating Current (mA): 25mA
Drift: 0.12 %/℃ Output
Power Consumption (W): 125 mW/5V

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-938341Category: Flow Sensors

About This Product

The Winsen F1031V Micro Flow Sensor for Ventilation – 150 SLM by Winsen is a premium flow sensors designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Flow Sensor
  • Operating Voltage (VDC): 14 — works with standard household power
  • Output Impedance: 1000 Ω
  • Operating Current (mA): 25mA
  • Drift: 0.12 %/℃ Output
  • Power Consumption (W): 125 mW/5V
  • Pressure(KPa): 100 kPa
  • Length (mm): 83

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Winsen F1031V Micro Flow Sensor for Ventilation-150 SLM uses the thermodynamic principle to detect the flow rate of the gas medium in the flow channel, with good precision and repeatability. Temperature sensors are built-in and every one product is calibrated for temperature compensation. At the same time, it has a linear analog voltage output, convenient to use.

Applications:
  1. Intensive care ventilator
  2. Portable ventilator
  3. Medical or home use ventilator

Features:

  1. Latest MEMS Sensor chip technology
  2. High accuracy, quick response, good repeatability
  3. Detection microflow accurately
  4. It is calibrated completely and temperature compensated

Package Includes:

1 x Winsen F1031v Micro Flow Sensor

1 x Connecting Cable

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.