Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
WIT WT301IOT-LTE IoT 4G Wireless Tilt Alarm Sensor — image 1
Hover to zoom

1 / 2 · Click to enlarge

WiT

WIT WT301IOT-LTE IoT 4G Wireless Tilt Alarm Sensor

33+ bought in past month
AI Summary
IMU, Accelerometer, Magnetometer and Gyroscope for premium buyers

The WIT WT301IOT-LTE IoT 4G Wireless Tilt Alarm Sensor by WiT is a premium imu, accelerometer, magnetometer and gyroscope designed for premium buyers. It features Model No. / Name: WT301IOT LTE and Battery Voltage (V): 3.6.

wireless convenience
₹7,999
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹7,999
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: WT301IOT LTE
Battery Voltage (V): 3.6
Nominal Capacity (mAh): 8500 mAh
Working Current (mA): <50mA
Acceleration (g): ±2
Length (mm): 100

Ideal For

Everyday convenience
Share:

About This Product

The WIT WT301IOT-LTE IoT 4G Wireless Tilt Alarm Sensor by WiT is a premium imu, accelerometer, magnetometer and gyroscope designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: WT301IOT LTE
  • Battery Voltage (V): 3.6 — keeps you powered without frequent recharging
  • Nominal Capacity (mAh): 8500 mAh
  • Working Current (mA): <50mA
  • Acceleration (g): ±2
  • Length (mm): 100
  • Width (mm): 56
  • Weight (g): 157

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

WiT WT301IOT-LTE IoT 4G Wireless Tilt Alarm Sensor device boasts high-precision measurement capabilities, integrating a high-precision accelerometer with advanced processing and Kalman filtering to calculate real-time motion posture. It also features an angle alarm function, allowing users to configure a threshold that, when exceeded, triggers data reporting. Remote monitoring is supported, providing tilt alarm functionality and remote control via mobile phone WeChat, ensuring fast response and stable monitoring. Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Noise Reduction: Advanced digital filtering for improved measurement accuracy.
  2. LTE Communication: Full network support for real-time remote data viewing, control, and IoT functionality.
  3. Stable Network: Wide coverage, high stability, π-type antenna matching (SWR < 1.65).
  4. Low Power Consumption: Long-term outdoor measurement support, <10uA standby current, 5-year standby with 8500mAh HPC IoT battery (1 report/hour).
  5. Ruggedized Design: PC shell, waterproof, dustproof, and high-temperature resistant.

Useful Link:
https://www.wit-motion.com/proztwl/51.html

Package Includes:

1 x WiT WT301IOT-LTE IoT 4G Wireless Tilt Alarm Sensor

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.