Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
DFRobot Lithium Battery Charger V1.0 — image 1
Hover to zoom

1 / 3 · Click to enlarge

DFRobot

DFRobot Lithium Battery Charger V1.0

35+ bought in past month
AI Summary
DF Robot Modules for everyday users

The DFRobot Lithium Battery Charger V1.0 by DFRobot is a value-for-money df robot modules designed for everyday users. It features Item Type: Accessory and Interface: Charging from Type-c usb, JST type or terminal access battery.

₹1,338
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,338
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Accessory
Interface: Charging from Type-c usb, JST type or terminal access battery
Accuracy: 1.5% (pre-adjusted to 4.2V charging voltage) C/10 charge termination
Model No. / Name: single-cell lithium-ion
Length (mm): 38
Width (mm): 32

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2071686Category: DF Robot Modules

About This Product

The DFRobot Lithium Battery Charger V1.0 by DFRobot is a value-for-money df robot modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Accessory
  • Interface: Charging from Type-c usb, JST type or terminal access battery — keeps you powered without frequent recharging
  • Accuracy: 1.5% (pre-adjusted to 4.2V charging voltage) C/10 charge termination —
  • Model No. / Name: single-cell lithium-ion
  • Length (mm): 38
  • Width (mm): 32
  • Shipping Weight: 0.015 kg
  • Shipping Dimensions: 9 × 8 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500 mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery. The board incorporates a charging circuit, status LED, connector for your battery (JST-type used in the batteries we carry), and a Type-C USB connector. Two small mounting holes allows this charger to be easily embedded into a project.

Features:

  1. Lithium battery compatibility
  2. Wide input voltage range
  3. Compact design
  4. Easy to use interface
  5. Reliable performance
  6. Charging current: 100mA, 500mA (default), 700mA, 1000mA optional
  7. DC/constant voltage
  8. Accuracy: 1.5% (pre-adjusted to 4.2V charging voltage) C/10 charge termination
  9. Operating environment temperature: -40℃~85℃

Package Includes:

1 x DFRobot Lithium Battery Charger V1.0

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.