Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Heltec Wi-Fi HaLow Ethernet STA/AP Wireless Network Bridge 902-928 MHz IEEE 802.11ah Wireless Ethernet Jumper 915Mhz — image 1
Hover to zoom

Heltec Wi-Fi HaLow Ethernet STA/AP Wireless Network Bridge 902-928 MHz IEEE 802.11ah Wireless Ethernet Jumper 915Mhz

34+ bought in past month
AI Summary
Smart Module for premium buyers

The Heltec Wi-Fi HaLow Ethernet STA/AP Wireless Network Bridge 902-928 MHz IEEE 802.11ah Wireless Ethernet Jumper 915Mhz is a premium smart module designed for premium buyers.

wireless convenience
₹10,570-25%
MRP:₹14,099Save ₹3,529
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

25% Off — you save ₹3,529 on this product!

Total: ₹10,570
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: bg-2050254Category: Smart Module

About This Product

The Heltec Wi-Fi HaLow Ethernet STA/AP Wireless Network Bridge 902-928 MHz IEEE 802.11ah Wireless Ethernet Jumper 915Mhz is a premium smart module designed for premium buyers. It delivers reliable performance at an accessible price.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.


Specifications:
Standard: IEEE 802.11ah
Wi-Fi: IEEE 802.11
Frequency band: 902-928 MHz (Sub-1 GHz)
Bandwidth modes: 1/2/4/8 MHz
Throughput: up to 32 Mbps @ 8 MHz
Maximum transmit power: 21 ±1 dBm
Interfaces: RJ45 (10/100M), USB‑C (5V)
Antenna connector: SMA
MCU: MT7628
Wi‑Fi HaLow chipset: HT‑HC01
Operating conditions: -20 to +70°C; Humidity 10%~90% (no‑condensing)
Power consumption: 300 mA (typical)
Ingress protection: IP64
Shell material: Aluminum Alloy, Plastic
Dimensions: 87.5 x 32.5 x 20 mm
Weight: 40 g (excluding antenna and other external devices)
Design: Wi‑Fi HaLow and 2.4 GHz dual‑band design
Transmission distance: up to 1 km (even farther)
Supports: Wi‑Fi and Ethernet

Features:
1. IEEE 802.11ah Sub‑1 GHz (902-928 MHz) with long‑range links up to 1 km.
2. Up to 32 Mbps at 8 MHz; selectable 1/2/4/8 MHz bandwidths.
3. Supports Wi‑Fi and Ethernet; Wi‑Fi HaLow + 2.4 GHz dual‑band design.
4. 21±1 dBm maximum transmit power and lower power consumption (300 mA typical).
5. IP64, -20 ~ +70°C, 10-90% RH (non‑condensing); compact 87.5x32.5x20 mm build.

Package Included:
1 x HaLow Dongle




Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.