Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
LandaTianrui LDTR - HM0017 38kHz Infrared Sensor Module for Arduino(Black) — image 1
Hover to zoom

1 / 7 · Click to enlarge

LandaTianrui LDTR - HM0017 38kHz Infrared Sensor Module for Arduino(Black)

AI Summary
Walkie Talkies for everyday users

The LandaTianrui LDTR - HM0017 38kHz Infrared Sensor Module for Arduino(Black) is a mid-range walkie talkies designed for everyday users. It features Size: 2.5*2.1*0.5cm and Weight: 5.5g.

₹1,508
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,508
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Size: 2.5*2.1*0.5cm
Weight: 5.5g
One Package Weight: 0.03kgs / 0.06lb
One Package Size: 3.5cm * 3.5cm * 1.8cm / 1.38inch * 1.38inch * 0.71inch
Best Sellers Rank (Consumer Electronics): #4112
Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #448

Ideal For

Everyday convenience
Share:
SKU: S-DIY0019BCategory: Walkie Talkies

About This Product

The LandaTianrui LDTR - HM0017 38kHz Infrared Sensor Module for Arduino(Black) is a mid-range walkie talkies designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Size: 2.5*2.1*0.5cm
  • Weight: 5.5g
  • One Package Weight: 0.03kgs / 0.06lb
  • One Package Size: 3.5cm * 3.5cm * 1.8cm / 1.38inch * 1.38inch * 0.71inch
  • Best Sellers Rank (Consumer Electronics): #4112
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #448
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies > Transmitters & Receivers Module): #24

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. Voltage: 5V. 2. Output port: standard infrared. 3. Received frequency: 38kHz ( carrier wave infrared codes ). 4. Received distance: 1 - 8m ( decided by transmitting port ). 5. Compatible with most of infrared remote controller. 6. With LED indicator lamp for receiving signal, easy to observe and debug. 7. Application: Arduino, 51 singlechip, Raspberry Pi and so on. 8. Come with a light transparent box for easy carry and store.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.