Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
MIKROE HYDROGEN Click (MIKROE‑1629) – MQ‑8 Hydrogen Gas Sensor Board, Analog, mikroBUS, Detection Range: 100 ppm~10,000 ppm — image 1
Hover to zoom

1 / 4 · Click to enlarge

MIKROE

MIKROE HYDROGEN Click (MIKROE‑1629) – MQ‑8 Hydrogen Gas Sensor Board, Analog, mikroBUS, Detection Range: 100 ppm~10,000 ppm

22+ bought in past month
AI Summary
Mikroe Modules for everyday users

The MIKROE HYDROGEN Click (MIKROE‑1629) – MQ‑8 Hydrogen Gas Sensor Board, Analog, mikroBUS, Detection Range: 100 ppm~10,000 ppm by MIKROE is a mid-range mikroe modules designed for everyday users. It features Item Type: Gas Sensor and Operating Voltage (V): 3.3 to 5.

₹1,628
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,628
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Gas Sensor
Operating Voltage (V): 3.3 to 5
Interface: Analog
Compatibility: mikroBUS
Board Size (mm): 42.9 x 25.4 mm
On-Board Sensors (Y/N): MQ-8 sensor

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1314942Category: Mikroe Modules

About This Product

The MIKROE HYDROGEN Click (MIKROE‑1629) – MQ‑8 Hydrogen Gas Sensor Board, Analog, mikroBUS, Detection Range: 100 ppm~10,000 ppm by MIKROE is a mid-range mikroe modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Gas Sensor
  • Operating Voltage (V): 3.3 to 5 — works with standard household power
  • Interface: Analog — compatible with modern devices
  • Compatibility: mikroBUS
  • Board Size (mm): 42.9 x 25.4 mm
  • On-Board Sensors (Y/N): MQ-8 sensor
  • Shipping Weight: 0.04 kg
  • Shipping Dimensions: 6 × 4 × 2 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

MIKROE HYDROGEN Click (MIKROE‑1629) carries an MQ-8 sensor for hydrogen (H2). The gas sensing layer on the sensor unit is made of tin dioxide (SnO2), which has lower conductivity in clean air. The conductivity increases as the levels of hydrogen rise. The detection range of the sensor is 100-10000ppm of hydrogen. To calibrate the sensor for the environment you’ll be using it in, Hydrogen click has a small potentiometer that allows you to adjust the load resistance of the sensor circuit. For precise calibration, the sensor needs to preheat (once powered up, it takes over 24h to reach the right temperature). Hydrogen click communicates with the target board through AN (OUT) mikroBUS line. It’s designed to use a 5V power supply only. Applications: Hydrogen detection, gas leakage

Features:

  1. Type Hydrogen Gas Sensor
  2. Interface: Analog
  3. Input Voltage 3.3V,5V
  4. Potentiometer for calibration
  5. On-board modules MQ-8 sensor for hydrogen (H2)

Package Includes:

1 x MIKROE HYDROGEN Click (MIKROE‑1629) – MQ‑8 Hydrogen Gas Sensor Board, Analog, mikroBUS, Detection Range: 100 ppm~10,000 ppm

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.