Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SOUSHINE FSR411, 7.5 mm,Force Sensing Shunt Resistor (50g~10Kg) — image 1
Hover to zoom
SOUSHINE

SOUSHINE FSR411, 7.5 mm,Force Sensing Shunt Resistor (50g~10Kg)

22+ bought in past month
AI Summary
Force and Flex Film Sensors for everyday users

The SOUSHINE FSR411, 7.5 mm,Force Sensing Shunt Resistor (50g~10Kg) by SOUSHINE is a value-for-money force and flex film sensors designed for everyday users. It features Thickness (mm): 0.3 and Durability: >1 million.

₹723
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹723
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Thickness (mm): 0.3
Durability: >1 million

Ideal For

Hobbyist flyingOutdoor recreationKids entertainment
Share:
SKU: robu-2547475Category: Force and Flex Film Sensors

About This Product

The SOUSHINE FSR411, 7.5 mm,Force Sensing Shunt Resistor (50g~10Kg) by SOUSHINE is a value-for-money force and flex film sensors designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Thickness (mm): 0.3
  • Durability: >1 million

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

SOUSHINE FSR411, 7.5 mm,Force Sensing Shunt Resistor (50g~10Kg).The 5kg Force Sensing Resistor features an ultra-thin design with a thickness of <0.3mm, offering precise force measurement in the range of up to 5kg. It has a 500g response point, ensuring accurate detection of small forces. The sensor is highly durable, with a lifespan of over 1 million actuations, and operates with an initial resistance of >10MΩ (no load). It works under a typical DC 3.3V test voltage, with a response time of <1ms and a recovery time of <15ms. Suitable for use in -20°C to 60°C environments, it is immune to electromagnetic interference (EMI) and electrostatic discharge (ESD), making it reliable for various applications.

Note: The actual product may vary in slight variation in  electronic components/marking/resemblance with the image shown depending upon quantity availability.


Features:

  1. Ultra-Thin Design: Thickness of <0.3mm, allowing for flexible and space-saving integration.
  2. Wide Measuring Range: Detects forces up to 5kg, suitable for various applications.
  3. Fast Response: <1ms response time for quick force detection.
  4. Quick Recovery: <15ms recovery time after force is removed.
  5. High Durability: Capable of withstanding over 1 million actuations, ensuring long-lasting performance.
  6. Low Initial Resistance: >10MΩ (no load), providing high sensitivity and accuracy.

Package Includes:

1 x SOUSHINE FSR411, 7.5 mm,Force Sensing Shunt Resistor (50g~10Kg)

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.