Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SparkFun DEV-17745 Thing Plus - RP2040 — image 1
Hover to zoom

1 / 3 · Click to enlarge

SparkFun

SparkFun DEV-17745 Thing Plus - RP2040

32+ bought in past month
AI Summary
Advance Development Boards for everyday users

The SparkFun DEV-17745 Thing Plus - RP2040 by SparkFun is a mid-range advance development boards designed for everyday users. It features Item Type: Development Board and Microcontroller Chip: RP2040.

₹2,912
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,912
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Development Board
Microcontroller Chip: RP2040
Flash Memory: 16 MB
SRAM: 264 KB
Max. Clock Frequency (MHz): 133
Length (mm): 90

Ideal For

Everyday convenience
Share:
SKU: robu-1062365Category: Advance Development Boards

About This Product

The SparkFun DEV-17745 Thing Plus - RP2040 by SparkFun is a mid-range advance development boards designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Development Board
  • Microcontroller Chip: RP2040
  • Flash Memory: 16 MB — effortless multitasking
  • SRAM: 264 KB
  • Max. Clock Frequency (MHz): 133 — smooth, flicker-free operation
  • Length (mm): 90
  • Width (mm): 25
  • Weight (g): 7.81

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The SparkFun Thing Plus - RP2040 is a low-cost, high-performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the Thing Plus or Feather footprint (with 18 GPIO pins), the board also includes an SD card slot, 16MB (128Mbit) flash memory, a JST single-cell battery connector (with a charging circuit and fuel gauge sensor), an addressable WS2812 RGB LED, JTAG PTH pins, four (4-40 screw) mounting holes, and our signature Qwiic connector.


Features:

  1. 264kB of embedded SRAM in six banks
  2. 6 dedicated IO for SPI Flash (supporting XIP)
  3. 30 multifunction GPIO:
    1. Dedicated hardware for commonly used peripherals
    2. Programmable IO for extended peripheral support
    3. Four 12-bit ADC channels with an internal temperature sensor (up to 0.5 MSa/s)
  4. USB 1.1 Host/Device functionality

Package Includes:

1 x SparkFun Thing Plus - RP2040

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.