Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
LILYGO T-Display 4MB ESP32 WiFi Bluetooth Development Board — image 1
Hover to zoom

1 / 5 · Click to enlarge

LILYGO

LILYGO T-Display 4MB ESP32 WiFi Bluetooth Development Board

5.01 rating
650+ bought in past month
AI Summary
IoT Development Boards for everyday users

The LILYGO T-Display 4MB ESP32 WiFi Bluetooth Development Board by LILYGO is a mid-range iot development boards designed for everyday users. It features Item Type: ESP32 Based and Flash Memory: 4MB.

wireless convenience
₹1,899
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,899
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: ESP32 Based
Flash Memory: 4MB
Memory Capacity: 4MB Flash 520 kB SRAM
USB to TTL Converter: CP2104
Interface: UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO,ADC, capacitor touch sensor, DACLNA pre-amplifier
Display: IPS ST7789V 1.14 Inch 135*240 resolution

Ideal For

Everyday convenience
Share:
SKU: robu-835843Category: IoT Development Boards

About This Product

The LILYGO T-Display 4MB ESP32 WiFi Bluetooth Development Board by LILYGO is a mid-range iot development boards designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: ESP32 Based
  • Flash Memory: 4MB — effortless multitasking
  • Memory Capacity: 4MB Flash 520 kB SRAM — effortless multitasking
  • USB to TTL Converter: CP2104
  • Interface: UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO,ADC, capacitor touch sensor, DACLNA pre-amplifier — compatible with modern devices
  • Display: IPS ST7789V 1.14 Inch 135*240 resolution — crisp, vibrant visuals in any lighting
  • Operating Voltage (VDC): 2.7 ~ 4.2 — works with standard household power
  • Max. Operating Current (A): 60

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This is LILYGO board is based on the ESP32-D0WDQ6 Wifi Module comes with a built-in 1.14inch display and also it has an onboard battery connector and battery management system. The board has an onboard USB Type - C connector which can be used to provide power and to upload code to the ESP32.

Features:

  1. Easy to Use
  2. LOW Energy Consumption
  3. Wide Application
  4. Long Life

Package Includes:

1 x LILYGO ESP32 WiFi and Bluetooth Development Board with 1.14" LCD Display

1 x Battery Connector

2 x 12 Pin Male Header

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.