Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
FTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board — image 1
Hover to zoom
FTDI

FTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board

26+ bought in past month
AI Summary
USB Interface Module for everyday users

The FTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board by FTDI is a value-for-money usb interface module designed for everyday users. It features Model No. / Name: Module and Data Transfer Rate: 3MBaud.

₹1,366
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,366
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 16 Aug30 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Module
Data Transfer Rate: 3MBaud
Virtual Com Port: Yes
No. of Channels: 1
Interface: UART
USB Speed: Full Speed (12Mbps)

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1537203Category: USB Interface Module

About This Product

The FTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board by FTDI is a value-for-money usb interface module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Module
  • Data Transfer Rate: 3MBaud
  • Virtual Com Port: Yes — compatible with modern devices
  • No. of Channels: 1
  • Interface: UART — compatible with modern devices
  • USB Speed: Full Speed (12Mbps)
  • USB Connector: No USB connector, Modules plugs directly into the USB host connector — compatible with modern devices
  • I/O pin voltage: 1.8V to 3.3V — works with standard household power

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

TheFTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board is a breakout board that converts USB 2.0 Full-Speed to UART. These modules do not have a USB connector, instead, the modules plug directly into the USB host connector and the pads of the PCB make electrical contact with the electrical contacts of the USB connector. The UART interface operates at +3.3V voltage levels, however, all I/Os are 5V tolerant USB to UART with four control bus lines, 3.3V power out limited to 50mA and 5V with as safety fuse. UART signals are available via 8 pads on the PCB. Note: For more technical details go through Datasheet in the attachment section 

Features:

  1. Easy to use
  2. Easy to interface
  3. Good quality product

Package Includes:

1 x FTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.